No Products in the Cart
sales@vinylfrog.com
Write to us for any inquries related to retail or wholesale
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of 160g double-sided silicone coated release liner.
![]() |
High-Grade Polymeric Calendared Vinyl Film Fashionable, Stunning Color |
With Air Release Channel Bubble-free Application |
![]() |
![]() |
Slideable; Repositionable |
Medium Stretchable The Maximum is 30 % |
![]() |
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 120±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 1360 | |||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.05 | |||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
Candy Metallic Neon Light Blue vinyl is reminiscent of the aqua or turquoise shade but even made more eye-catching with its neon shine. This vinyl is a wonderful mix of subtle green and blue hues blended together to give this candy-like colored shade.
This Candy Metallic Neon Light Blue is suggestive of the feeling of peaceful calm, much like looking at the waves of the sea.
The vinyl material is made of thin and durable material that is easy to apply and available in a variety of sizes, perfect for partial or whole vehicle wraps. Its ease of application makes it possible to apply on both flat and contoured or curved surfaces, like mirrors, bumpers, etc. And if you are feeling a bit more adventurous, you can complement your exterior wrap, with interior vinyl of the same shade since this material adheres well to different kinds of surface materials
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.