No Products in the Cart
sales@vinylfrog.com
Write to us for any inquries related to retail or wholesale
![]() |
High Grade Polymeric Calendared Vinyl Film Fashionable, Stunning Color |
With Air Release Channel Bubble-free Application |
![]() |
![]() |
Slideable; Repositionable |
Medium Stretchable The Maximum is 30 % |
![]() |
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Surface materials | um | 130±2% | High-grade PVC-Polymeric |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um |
180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 1360 | |||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.05 | |||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
Give your vehicle a custom look with this Glitter Metallic Diamond Red White Vinyl Wrap! This wrap has a glittery finish that makes it appear as though it were real paint. The vinyl is also UV and weather-resistant. This product uses a pressure-sensitive adhesive that allows for easy installation and repositioning until you're satisfied with the placement. The material is durable enough to last the lifetime of your vehicle but can be removed easily when desired.
The Glitter Metallic Diamond Red White Wrap was designed specifically for cars, trucks, motorcycles, and other vehicles, but it can also be used on any surface that needs to be protected from scratches or wear and tear. The application process is very simple, just clean the surface, peel off the backing from your new vinyl wrap and press it down onto your desired surface using a heat gun or hairdryer (not necessary for the glue to activate).
This vinyl wrap is made from three layers of high-quality material; one layer is a protective layer, one is an adhesive layer and the third layer is the actual color/design layer. The protective layer prevents damage to the other layers while they are being installed onto your vehicle's body panels.
It can be cleaned with water, soap, and a damp cloth. It can be easily removed to change the colors and designs whenever you want.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.