Skip to product information
  • Sku: GLMP06-1m

Glitter Metallic Diamond Red White Vinyl Wrap

£54.00 GBP
In stock!
View full details

Glitter Metallic Diamond Red White Vinyl Wrap






  • High Grade Polymeric Calendared Vinyl Film
  • Fashionable, Stunning Color
  • With Air Release Channel
  • Bubble-free Application
  • Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %


Recommended Uses

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Surface materials um 130±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um

180±2%(paper)/ 130±2%(plastic)

Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%


Physical properties 

▲ General Properties

Features Test Method Results
Release force
25℃ and 50% 0.12
Initial tack
under 26℃ and 64%, GB31125-2014 1360
Peel Strength
25℃and 42%, GB/T2792-1998 7.05
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%


Give your vehicle a custom look with this Glitter Metallic Diamond Red White Vinyl Wrap! This wrap has a glittery finish that makes it appear as though it were real paint. The vinyl is also UV and weather-resistant. This product uses a pressure-sensitive adhesive that allows for easy installation and repositioning until you're satisfied with the placement. The material is durable enough to last the lifetime of your vehicle but can be removed easily when desired.

The Glitter Metallic Diamond Red White Wrap was designed specifically for cars, trucks, motorcycles, and other vehicles, but it can also be used on any surface that needs to be protected from scratches or wear and tear. The application process is very simple, just clean the surface, peel off the backing from your new vinyl wrap and press it down onto your desired surface using a heat gun or hairdryer (not necessary for the glue to activate).

This vinyl wrap is made from three layers of high-quality material; one layer is a protective layer, one is an adhesive layer and the third layer is the actual color/design layer. The protective layer prevents damage to the other layers while they are being installed onto your vehicle's body panels.

Features Glitter Metallic Diamond Red White:

  • Non-scratch Adhesive, Simple to Apply, and Easy To Remove
  • Color Matched, High-Quality Film that Looks Like Paint
  • Self-Healing, Scratch Resistant Surface Protects Against Graffiti, Yellowing, and Fading

It can be cleaned with water, soap, and a damp cloth. It can be easily removed to change the colors and designs whenever you want.


Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.