Skip to product information
  • Sku: SGP09-1m

High Glossy Ferrari Red Vinyl Wrap

£57.00 GBP
 per 
In stock!
Size
View full details

High Glossy Ferrari Red Vinyl Wrap

Description

Video

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner. 

 

Material

  • High Grade Polymeric Calendared Vinyl Film
  • Fashionable, Stunning Color

  • With Air Release Channel
  • Bubble-free Application

  • Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Easy To Wrap

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Top protected film um 36±2% PET/PVC
Surface materials um 115±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um 180±2%(paper)/
130±2%(plastic)
Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%

 

Physical properties 

▲ General Properties

Features Test Method Results
Release force
N/25mm
25℃ and 50% 0.12
Initial tack
g/25mm
under 26℃ and 64%, GB31125-2014 987
Peel Strength
N/25mm
25℃and 42%, GB/T2792-1998 7.25
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%

 

Ferrari red is a stunning high gloss vinyl wrap that will make any car stand out! This material is UV resistant, waterproof, and easy to install. This Ferrari Red Vinyl Wrap is great for covering motorcycle tanks, car body parts, and much more. The ultra-reflective finish reflects light like no other vinyl wrap, which can be seen both during the day and night. The perfect finishing touch for your Ferrari Red-themed special occasion!

Designed to provide a glossy finish and protect the paint layer, this vinyl wrap will cover your vehicle's most prominent surfaces. This Ferrari Red Vinyl Wrap is made from the highest quality vinyl and will last for years without fading or scratching.

Ferrari Red Vinyl Wrap is ideal for SUVs, trucks, trailers, and other large vehicles! The glossiness of this vinyl wrap is very close to the real paint job of a Ferrari. The vinyl is removable, but it's not reusable and cannot be refinished or repainted without removing the existing wrap first.

This Ferrari Red vinyl wrap is available in a wide range of widths and lengths, allowing you to wrap even the largest parts of your car in no time. The vinyl material can be applied by hand or with an air gun, making it ideal for even those who are not experienced with customizing cars.

Features High Glossy Ferrari Red Vinyl Wrap

  • High Gloss Finish
  • UV & Scratch Resistant
  • Apply with Heat Gun or Hair Dryer (recommended)
  • Removal is Easy; No Residue Left Behind

The Ferrari Red Vinyl Wrap comes with easy-to-follow installation instructions, making it simple to apply yourself at home or take to a professional installer if you prefer not to DIY.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.