No Products in the Cart
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner.
 |
High Grade Polymeric Calendared Vinyl Film Fashionable, Stunning Color |
|
With Air Release Channel Bubble-free Application |
 |
 |
Slideable; Repositionable |
|
Medium Stretchable The Maximum is 30 % |
 |
▲ Standard Size & Appearance
▲ General Properties
Forget dull and boring, the Super Glossy Ochre Vinyl wrap will liven up your car and make it stand out. Our Super Glossy Ochre Vinyl wrap is a great way to camouflage your car, or just add a splash of color! This vinyl wrap is a high-gloss, two-tone combination of sandalwood and mustard yellow. The matte black top coat gives it a rich appearance and eye-catching shine. The vinyl is thick and robust, leaving behind a smooth finish. It's removable, but not reusable once applied.
The shiny finish uses a UV protective layer so it looks as good on the sides and back of your vehicle as it does facing forward. This product is easy to install with user-friendly instructions and applicators. It's ultra-glossy, so it looks amazing both in direct sunlight and under incandescent lights. Featuring an adhesive backing and this high-performance wrap can be applied to nearly any surface of the vehicle.
This vinyl wrap is designed to withstand extreme weather conditions such as snow and ice, rain, and even direct sunlight! It can be used on the interior or exterior of your car and will give you that fresh new look.
This vinyl wrap is very easy to apply and remove and will not leave any residue on your car when removed. There are no restrictions on this product, it can be used anywhere on your vehicle. This product is 100% removable, so if you are not happy with the way it looks just peel it off!
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
