No Products in the Cart
sales@vinylfrog.com
Please contact us for any retail or wholesale inquiry.
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner.
![]() |
High Grade Polymeric Calendared Vinyl Film Fashionable, Stunning Color |
With Air Release Channel Bubble-free Application |
![]() |
![]() |
Slideable; Repositionable |
Medium Stretchable The Maximum is 30 % |
![]() |
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 115±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 987 |
|||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.25 |
|||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
High Glossy Bean Red Vinyl wrap is a great way to add some excitement to your vehicle. With this high gloss, extremely durable vinyl you can redefine the look of your car or truck. This high-quality vinyl is a much better alternative to removing your factory paint and repainting. The vinyl is made from an adhesive-backed film that requires no messy glue or rubbing alcohol to apply. This material works well in applying to cars, trucks, and boats and looks great with most color schemes.
It is available in different sizes so you can choose the perfect size for your vehicle. The color is bright and crisp and reflects the light beautifully. It's also extremely durable and can withstand temperatures up to 500 degrees Fahrenheit. It will not lift or bubble even after years of exposure to the elements.
This is perfect for use on vehicle windows or interior parts that need to be seen through. The black backing allows light to pass through, so it is not completely opaque. It also helps to reduce glare and make your vehicle look amazing! The material is waterproof and UV resistant which makes it great for interior parts or exterior surfaces like hoods, roofs, or bumpers where moisture might get trapped.
The color is a true red, not orange or pink. The sun hits it at different angles and you can see the reflection. It's very classy looking and it looks great on any car.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.