Skip to product information
  • Sku: SGP12/PET-15m

High Glossy Tiffany Vinyl Wrap

$519.00 USD
In stock!
View full details

High Glossy Tiffany Vinyl Wrap




Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.



  • High Grade Polymeric Calendared Vinyl Film
  • Fashionable, Stunning Color
  • With Air Release Channel
  • Bubble-free Application
  • Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %


Recommended Uses

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Top protected film um 36±2% PET/PVC
Surface materials um 100±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um 180±2%(paper)/
Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%


Physical properties 

▲ General Properties

Features Test Method Results
Release force
25℃ and 50% 0.12
Initial tack
under 26℃ and 64%, GB31125-2014 987
Peel Strength
25℃and 42%, GB/T2792-1998 7.25
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Time Limits  Must use it within 3 Months after you receive the wrap film 3 Months
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%


Add some glamour to your car with our high gloss tiffany wrap! You can easily revamp your car's look without spending a lot of money. Our high-quality vinyl doesn't fade or crack and can be applied to any smooth surface - even on your trim! This vinyl is super popular because it has a high gloss finish and the color and texture of the real glass. This style is used to give any surface a stunning, three-dimensional appearance!

Our High Glossy Tiffany Vinyl Wrap features a flexible, high-gloss, vinyl film that is easy to apply. Vinyl with a gloss effect works well for vehicle interiors and exteriors. The finish has a luxurious appearance and feels that make it ideal for use on cars, SUVs, and other automotive surfaces.

This vinyl wrap can be applied to any smooth surface that is clean and dry without the need for any special prep work. You simply remove the backing from the vinyl, peel off the transfer tape that comes with it, position it on your vehicle and then rub down the edges using pressure from your hand or an applicator pad. Then just let it sit for about 5 minutes before peeling off any remaining transfer tape or bubbles.

Features High Glossy Tiffany:

  • Easy Installation
  • High Gloss Finish
  • Long-Lasting

The best part about this wrap is its durability and it is due to its ability to resist scratches and fading from sun exposure. This makes it an excellent choice for any vehicle that spends time outdoors or in direct sunlight consistently.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents


We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.

The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.