No Products in the Cart
sales@vinylfrog.com
Write to us for any inquries related to retail or wholesale
Looking to give your car a new look without the hassle of painting? Check out our Super Glossy Lavender Purple Vinyl Wrap Roll! This PVC material is very conformable and flexible, meaning it can be molded to any and every part of your vehicle. Plus, it's suitable for full car wrapping or any other smooth or curved surface. The high-grade polymeric calendared vinyl film has an air release channel to help with installation, plus a high-quality solvent-based adhesive glue for a secure hold. It'll last you 4 years indoors and 2 years outdoors – so you can show off your new look with confidence!
Top Protected Film | |
---|---|
PVC Material | |
Adhesive | |
Release Liner |
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 115±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 987 |
|||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.25 |
|||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.