No Products in the Cart
sales@vinylfrog.com
Please contact us for any retail or wholesale inquiry.
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner.
![]() |
High Grade Polymeric Calendared Vinyl Film Fashionable, Stunning Color |
With Air Release Channel Bubble-free Application |
![]() |
![]() |
Slideable; Repositionable |
Medium Stretchable The Maximum is 30 % |
![]() |
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 115±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 987 |
|||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.25 |
|||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
Add a vibrant pop of color to your car or truck with our Orange Poppy wrap. This vinyl features a glossy finish and permanent adhesive to ensure it stays attached firmly through all seasons. This high-quality material applies to your car, truck, or SUV in minutes without air bubbles or wrinkles. Easy to apply over your existing color. Our super glossy orange poppy vinyl wrap is made of a high-quality, durable polyvinyl film that allows it to be instantly applied without any creases. Put a unique spin on your device with this trendy and bright pattern.
Our premium opaque Super Glossy Orange Poppy Vinyl Wrap will give your car a distinctive look, protecting it against scratches, fading, and UV damage. . Each sheet has a glossy finish that is easy to clean with soap and water and can be removed if desired (with heat). Although the vinyl is waterproof, we recommend using a spray sealant after installation to ensure maximum durability and longevity.
This wrap has a glossy finish and does not have any glare when viewed at different angles. The material can be removed without leaving any adhesive or residue on your device.
The orange poppy design gives this vinyl wrap an elegant appearance while still being functional. This vinyl wrap can be installed by anyone with little to no experience in automotive customization.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.