Transform your vehicle with the stunning Glossy Metallic Gotland Green Wrap by VinylFrog. This rich, deep shade of green with a striking, metal-like shimmer is a perfect blend of sophistication and boldness, making your ride look both classy and modern.
Made from high-grade polymeric vinyl, our Glossy Metallic Gotland Green Car Wrap ensures durability and longevity. Its metallic finish with a high dose of shimmer not only enhances the beauty of your vehicle but also provides added protection against scratches, UV rays, and other environmental hazards. This means your vehicle will maintain its vibrant and flawless appearance for longer, reducing the need for frequent maintenance.
Our vinyl acts as a strong shield, protecting your car from rust and corrosion by sealing out moisture when applied as a full wrap. When removed, your car stays in excellent condition helping you get a better offer if you decide to sell.
How Much Vinyl Needs To Wrap Your Vehicle
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.
Medium Stretchable
The Maximum is 30 %
▲ Standard Size & Appearance
▲ General Properties
The cost of our Glossy Metallic Gotland Green Vinyl Wrap is quite affordable. Sedan and coupe owners will have to spend anywhere between $2000 to $3000 to get a full professional wrap. If you own a bigger vehicle, the cost will increase. For partial wrapping, you can buy this wrap for under $300.
The wrap will reach your address in a roll form packed perfectly in a sturdy box. Our vinyl is covered with a thin and transparent top-protected film that saves it from marks and blemishes during shipping. It has a robust pressure-sensitive acrylic adhesive that has a 130um plastic liner over it to maintain its tack.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
!