The Glossy Metallic Metal Black Car Wrap by Vinyl Frog is an amazing film that gives your vehicle a unique look on the road. Black has always been a favorite color for vehicles. Now imagine it with a shiny metallic finish that adds a cool look to your car sure to grab attention everywhere you go.
Our Metal Black Vinyl has a four-layered composition. At the top is the transparent protective film with the actual polymeric calendered vinyl film underneath. This has a layer of pressure-sensitive acrylic adhesive that forms a strong bond with the exterior of your vehicle. To maintain its tack, it is covered with a high-quality 130um plastic liner.
We have this vinyl available for you in roll form in six different sizes from 3.28ft to 59ft. Whether you are opting for a full or partial wrap, you can get the roll size you want without worrying about wastage. The Glossy Metallic Metal Black Vinyl Wrap cost is pretty economical too. You can get your whole car professionally wrapped for $2000 depending on the size.
How Much Vinyl Needs To Wrap Your Vehicle
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High-Quality 130um Plastic Liner.
Medium Stretchable
The Maximum is 30 %
▲ Standard Size & Appearance
▲ General Properties
Our premium-quality film is water and weather-resistant. It has anti-stain, anti-scratch, and anti-corrosion properties. It protects the original paintwork of your vehicle from harsh elements in the environment such as road debris, rock chips, rust, and UV rays.
You can get our Glossy Metallic Metal Black Car Wrap from VinylFrog. Simply click on the roll size you want and head for checkout. The vinyl will be delivered to your doorstep in 10 to 15 business days.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater.
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
!