Wrap your car in the robust protection of the Super Matt Military Green Color PPF by Vinyl Frog. It’s an amazing dark shade that gives your ride a gung-ho, powerful look, ready to encounter all the hazards on the road. The matt finish further adds to the sturdy vibe of your ride. A full PPF wrap forms a comprehensive shield that prevents road debris, rock chips, tar, and other detrimental elements from leaving unsightly marks on the original paintwork. The atrocious UV rays of the sun and rust cannot affect the exterior as well. The film takes the brunt, yet maintains its flawless appearance over time.
How? It all comes down to the engineering behind our Super Matte Military Green PPF Film. It has a hydrophilic layer that does not let water and other liquid contaminants accumulate on its surface, making it easier to clean them without leaving any marks or streaks. It also has a self-healing topcoat that mends minor scratches upon application of heat. Remarkable, isn’t it? It’s a dry application film, so you simply need a squeegee and a heat gun for its smooth placement over the surface. All these features make this superb PPF a must-have. Add it to the cart now and proceed to checkout!
Features
- Smooth, glossy, color finish.
- Made from durable material for high-performance protection.
- Durable, high-performance, self-adhesive film.
- Equipped with a heat-activated, self-healing topcoat.
- Hydrophobic with UV and stain-resistant properties.
- Offers supreme protection to the underlying surface
- Scratch-resistant and anti-corrosion.
- Heat and UV resistant.
- Easy to apply and maintain.
- Acrylic-based, robust adhesive.
- Easy to slide and reposition.
Specifications
- Color: Military Green.
- Finish: Super Matte.
- Application Method: Dry Application.
- Packaging: Roll.
- Sizes available: 5ft x 3.28ft. 10ft, 16ft, 33ft, and 49ft.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Structure

Functions
Recommended Uses
▲ Standard Size & Appearance
Classification |
Unit |
Specs |
Remarks |
Thickness |
Top protected film |
um |
50±2% |
PET |
Self-healing Layer |
um |
15±2% |
/ |
Face Film |
um |
160±8 |
Thermoplastic Polyurethane |
Acrylic Adhesive |
um |
25±2% |
Solvent-based |
Release liner |
um |
85±2% |
Satin Semi-transparent White |
Surface |
- |
Glossy & Transparent |
Super Glossy without Orange Peel |
Width |
m |
1.52±0.01% |
4.98ft |
Length |
m |
15±1% |
49.21ft |
Physical properties
▲ General Properties
Features |
Test Method/Conditions |
Data |
Gloss(60°) |
GB 8807 |
≥90 |
Water Contact Angle |
DL/T864 |
≥75 |
Hardness |
ISO0868/ ASTM D-2240 |
≥90 |
Elongation at Break |
GB/ T1040 |
≥340 |
Coating Elongation at Break |
GB/ T1040 |
≥85 |
Tensile Strength |
GB/ T1040 |
≥20 (mpa) |
Peel Strength |
GB/ T2792 |
≥800 |
Scratch Repair |
(0.1mm) Copper brush & Heat gun |
Thermal Self-Healing |
Chemical Resistance |
(Detergent) Naturally dried |
No Marks |
Mud Resistance |
70°/1h Wash & Heat gun |
No Marks |
Stain Resistance (oil-based pen) |
Naturally dried, wipe with alcohol, no marks |
No Marks |
Gloss |
60° refraction |
≥90° |
Water Contact Angle |
Refer to DL/T864 |
≥75° |
Alkali Resistance (168H) |
20% sodium hydroxide solution |
No abnormalities |
Acid Resistance |
10% hydrochloric acid solution |
No abnormalities |
Yellowing ΔE |
QUV Method |
≤2.4 |
Aging Test 1 |
70℃ and 7 days |
No Adhesive Residue with Heat |
Aging Test 2 |
90℃ and 7 days |
No Adhesive Residue without Heat |
Application Temperature |
/ |
+20℃ to +30℃ |
Service Temperature |
/ |
-50℃ to +110℃ |
Recommended Shelf Life |
72°F (22°C) and 50% RH |
2 years |
Durability |
/ |
3 years |
Time limits |
Must use it within 3 months after receiving the wrap film |
3 months |
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.