Skip to product information
  • Sku: SGP11/PET-1m

High Glossy Yellow Vinyl wrap

$61.00 USD
In stock!
View full details

High Glossy Yellow Vinyl wrap




Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.



  • High Grade Polymeric Calendared Vinyl Film
  • Fashionable, Stunning Color
  • With Air Release Channel
  • Bubble-free Application
  • Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %


Recommended Uses

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Top protected film um 36±2% PET/PVC
Surface materials um 115±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um 180±2%(paper)/
Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%


Physical properties 

▲ General Properties

Features Test Method Results
Release force
25℃ and 50% 0.12
Initial tack
under 26℃ and 64%, GB31125-2014 987
Peel Strength
25℃and 42%, GB/T2792-1998 7.25
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Time Limits  Must use it within 3 Months after you receive the wrap film 3 Months
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%


Put your car on yellow alert. The vinyl wrap features a high gloss, bright yellow finish that will turn heads wherever you go. This is a great way to add character to your vehicle without doing any permanent modifications. Protect your vehicle from nicks, scratches, and UV rays with a high gloss vinyl wrap! It changes both color and texture to give your car a wild new look. It's perfect for those who want to add a bit of character and style to their ride.

The vinyl is not easily scratched or abraded and remains pliable even in cold weather conditions. Installing the High Gloss Yellow Vinyl Wraps is extremely easy: clean the surface thoroughly and ensure it has no greasy residue; remove the backing from each piece and press it down firmly onto the area you wish to cover; smooth out any bubbles with a heat gun or hairdryer. These vinyl sheets are also removable without leaving any residue behind.

The vinyl is extremely durable and can withstand most weather conditions. It's also waterproof, so you don't have to worry about water damaging your wrap. It will not fade or peel and it can be used over and over again. Our High Glossy Yellow Vinyl Wrap is available in many different sizes to fit any project.

Features High Glossy Yellow

  • Waterproof
  • Scratch Resistant
  • UV Protected
  • Glossy finish

The yellow color on this high gloss vinyl wrap works well with the black accents on the rims of the car and also with the blacked-out portions of the headlights, grille, and other parts of the car. 

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents


We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.

The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.