No Products in the Cart
sales@vinylfrog.com
Write to us for any inquries related to retail or wholesale
Top Protected Film | |
---|---|
PVC Material | |
Adhesive | |
Release Liner |
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 120±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 1360 | |||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.05 | |||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
These wraps are the perfect way to add a splash of fun to your ride, even if you aren't planning to go racing. And the metallic color and unique styling is going to be a conversation starter for years to come!
The vinyl is weather resistant and will not crack or peel off after a few months in the sun. It also comes with a lifetime warranty against peeling. The wrap has dual-cast film, which is a combination of two layers of cast vinyl. This provides a great balance between rigidity and flexibility. The wrap also has air channels to keep your car perfectly clean. It is perfect for preventing dust and dirt build up that would otherwise ruin the paint job.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
More Features
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.