Types Of Bicycle Wrap
- Full Wrap: Covers the entire frame. The bike is partially dismantled so each tube and panel gets wrapped separately. Best for a complete color overhaul.
- Partial Wrap: Partial wrap means covering only certain panels of the bike. For instance, you might want to cover just your chainstays/seat stays, down tube, top tube, and seat tube.
- Custom Wrap: Any design, pattern, or graphic printed onto the vinyl before application. This is how you get something truly one-of-a-kind.
Why Wrap Instead Of Repaint?
- Protection: The vinyl layer shields your frame from road debris, chain rub, and UV damage. Mud wipes off the wrap instead of scuffing the paint beneath.
- Reversible: Peel it off and the original finish is still there. No stripping, no sanding, no respraying. A change of mind costs minutes, not hundreds of dollars.
- Fast turnaround: A professional wrap job takes a few hours. A full respray takes days and requires the bike to be out of commission while paint cures.
- Cost-effective: DIY wrapping costs $100–$250 in materials. Professional paint jobs on the same frame often run $400–$800 or more.
How Much Does It Cost To Wrap A Bicycle?
If you decide to wrap your bicycle with vinyl by yourself, you might spend anywhere between $100 to $250. But when you hire a professional to wrap your bicycle, the cost can reach $500 or more.
The cost of wrapping a bicycle can vary based on lots of different things, including the shape and size of the bike, how complicated the design is, and whether or not you choose to have the decals laminated. But we don't think those costs should keep you from expressing your style which is why we offer a wide range of options to fit any budget.
How To Apply Bicycle Vinyl Wrap?
With patience and the right tools, a DIY wrap is achievable. Here's the process in order:
- Clean the frame thoroughly, any grease or dirt will prevent proper adhesion
- Wipe down with isopropyl alcohol and let it dry completely
- Remove any existing decals or stickers from the frame surface
- Measure and cut your vinyl, leaving a few centimetres of excess on each edge
- Apply the vinyl slowly, using a heat gun on low to help it conform to curves
- Smooth out air bubbles with a squeegee or card as you go, work from center outward
- Trim excess edges cleanly and press all borders flat with the heat gun
Maintenance And Care Of Bicycle Vinyl Wrap
The vinyl wrap on your bicycle is to be treated like a car wrap and cared for in the same manner.
Cleaning
Vinyl-wrapped bicycles can be cleaned just like a car, but with less soap/water mix or you can use a simple spray bottle of water with no soap and wipe down. You do not want any soapy residue left on the vinyl as it will attract dirt and grime. Also, avoid washing your bicycle in direct sunlight as this may cause the water to dry before you wipe it off and leave spots.
Shine
The bicycle wrap has been laminated with a clear coat that does not need to be waxed or polished after installation.
Scratches
The vinyl wrap is fairly durable, but it can still scratch if something rubs against it hard enough (like a screwdriver). If this happens, we recommend wrapping over the area where the scratch is on your next ride. The air pressure from riding will smooth out the new layer over the scratch and make it less noticeable.
Storing
Store the bike in a dry space away from moisture. For long-term storage, cover the wrapped sections with breathable cloth or plastic sheeting to prevent dust and damp from settling on the surface.
