Skip to product information
  • Sku: SGP26/PET-1m

High Glossy Bean Red Vinyl Wrap

£50.00 GBP
 per 
In stock!
Size
View full details

High Glossy Bean Red Vinyl Wrap

Description

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.

 

Material

  • High Grade Polymeric Calendared Vinyl Film
  • Fashionable, Stunning Color
  • With Air Release Channel
  • Bubble-free Application
  • Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Top protected film um 36±2% PET/PVC
Surface materials um 115±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um 180±2%(paper)/
130±2%(plastic)
Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%

 

Physical properties 

▲ General Properties

Features Test Method Results
Release force
N/25mm
25℃ and 50% 0.12
Initial tack
g/25mm
under 26℃ and 64%, GB31125-2014 987
Peel Strength
N/25mm
25℃and 42%, GB/T2792-1998 7.25
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Time Limits  Must use it within 3 Months after you receive the wrap film 3 Months
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%

 

High Glossy Bean Red Vinyl wrap is a great way to add some excitement to your vehicle. With this high gloss, extremely durable vinyl you can redefine the look of your car or truck. This high-quality vinyl is a much better alternative to removing your factory paint and repainting. The vinyl is made from an adhesive-backed film that requires no messy glue or rubbing alcohol to apply. This material works well in applying to cars, trucks, and boats and looks great with most color schemes.

It is available in different sizes so you can choose the perfect size for your vehicle. The color is bright and crisp and reflects the light beautifully. It's also extremely durable and can withstand temperatures up to 500 degrees Fahrenheit. It will not lift or bubble even after years of exposure to the elements.

This is perfect for use on vehicle windows or interior parts that need to be seen through. The black backing allows light to pass through, so it is not completely opaque. It also helps to reduce glare and make your vehicle look amazing! The material is waterproof and UV resistant which makes it great for interior parts or exterior surfaces like hoods, roofs, or bumpers where moisture might get trapped.

Features High Glossy Bean Red Vinyl Wrap

  • High Gloss, Red Vinyl Film
  • Easy to Apply with 3M Tape
  • Highly Durable & Scratch Resistant

The color is a true red, not orange or pink. The sun hits it at different angles and you can see the reflection. It's very classy looking and it looks great on any car.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!

We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.


The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.