posted by vinyl frog on July 2, 2022
Car Wrapping Tool Kit
We are here to streamline your life. Great for cars, trucks, vans, and SUVs, our Car Wrapping Tool Kit includes everything you need to wrap your vehicle quickly and easily. Use this car wrapping tool kit to wrap your vehicle with a professional touch. Its specially designed tools make the job simple and effortless.
Now you can wrap your car right in your own garage with this 8-piece vinyl tool kit. In minutes, you'll be wrapping perfectly while protecting your investment with hassle-free installs. This Car Wrapping Tool Kit from VinylFrog includes VinylFrog Tucking Tool Set that gently tucks in vinyl or other auto wrap material by using a soft, foam head covered in rubber and a cutter that gently squeezes the vinyl over it. VinylFrog Squeegees PPF are perfect for applying pressure on sheet vinyl, creating a squeaky clean surface that vinyl will stick to like glue, so there is no risk of bubbling or peeling.
VinylFrog Wrap Cutter makes quick work of cutting larger pieces of vinyl or other materials slicing smoothly through each layer with ease - plus a magnifier lets you see right through the tape to avoid any trimming mistakes!
The VinylFrog IR Thermometers is an indispensable tool for checking the temperature of your vehicle's interior during installation and helps ensure you don't create too much heat which could melt shiny surfaces or damage plastic trimming. Our Car Wrapping Tool Kit was created to help you get the job done faster, easier, and with more professional results.
We've made it easy with our VinylFrog Magnets, VinylFrog Squeegees for wrap installation, VinylFrog Air Release Pen for car wrap installation, and VinylFrog Knives for wrap cutting. Now there's no excuse for a sloppy job on your next vehicle wrap.
Tools Included In Car Wrapping Tool Kit
Car wrapping is a great way to protect your car from the weather and it looks stunning. The Car Wrap Tool Kit is a complete and comprehensive tool kit for the professional or DIY car wrap installer. Here, we discuss a brief introduction of all tools that are included in our vinyl frog car wrapping tool kit.
VinylFrog Tucking Tool Set
The vinyl tucking tool set is designed to help you easily wrap your car's bumpers, fenders, and other trim with vinyl without any trouble at all. This VinylFrog Tucking Tool Set is made from high-quality stainless steel and has been designed to allow you to tuck your vehicle with ease. The kit includes all the necessary tools for tucking along with detailed instructions for using them.
VinylFrog Squeegees For PPF
The VinylFrog Squeegees for PPF are designed to protect against scratches caused by friction during installation, as well as provide protection against minor damage caused by normal wear and tear. These vinyl squeegees can also be used as a barrier between the wrap and your vehicle's paintwork, which means that you don't have to worry about having bubbles or marks on your car after wrapping it.
VinylFrog Wrap Cutter
The VinylFrog Wrap Cutter is designed to safely cut through the edge of your wrap with ease. It’s perfect for cutting through heavy gauge vinyl and can easily cut through multiple layers at once. The VinylFrog Wrap Cutter features a super sharp blade that can easily cut through any material, making it the perfect tool for cutting and creating vinyl car wraps. These blades are extra sharp and can be used again and again without fading. This makes the tool perfect for repeated use on a large number of car wraps!
The VinylFrog Magnets are perfect for holding down small areas of your wrap, like logos or other graphics that may not slide down into place easily or stay in place when exposed to wind or weather conditions. There is also a special tool included in each kit so you can keep them organized in your car or locker. The VinylFrog Magnets are easy to install and can be done in just a few minutes. Just place them on the side of your vehicle, press them down firmly with a mallet or hammer and then peel off the paper backing that is on each magnet.
VinylFrog IR Thermometers
The VinylFrog IR Thermometers are great for measuring temperature changes in your car wraps before they dry completely, so you know when it’s time to apply another layer! In addition, this device has been proven to work under tough conditions such as high temperatures and low humidity levels.
VinylFrog Squeegees For Wrap Installation
These tools allow you to squeeze out excess glue, which can be harmful if it dries on your vehicle's surface. The squeegees are made from durable polyurethane, so they will last through many applications. They are also made with a textured surface that makes them easy to grip during application.
VinylFrog Knives For Wrap Cutting
This set contains Vinyl Frog knives that can be used to cut the vinyl film in various ways, depending on your application needs. This knife is serrated and has a straight edge blade, or maybe flat, and has both serrated and straight edges on each side of the blade. The knives come in the size of 1CM*13CM.
VinylFrog Air Release Pen For Car Wrap Installation
This tool allows you to release air bubbles from your wrap without damaging any part of your car's surface or body panels. It does not leave any residue on the surface of the vehicle after it has been released. This tool has a needlepoint on it, so you will be able to poke through the vinyl wrap to get to any air bubbles that may be trapped inside. You don't have to worry about the needle tip melting into your vehicle as it is heat resistant. This product works well with most types of vinyl, including wraps and reflective films.
Frequently Asked Questions
A tool kit is just that - a collection of tools. There are many things that go into making a car wrapping job successful, from planning to equipment to supplies and keeping your customer happy. This tool kit is not meant to be a definitive guide, but it's a great starting point for anyone who is new to car wrapping or who doesn't know where to begin.
We hope you found this guide helpful for wrapping your own car.
Anything that can help you navigate this process more effectively is always welcome. Whether you're wrapping a car for fun or for business, do it the right way and with the right tools to make sure that your work lasts through every season.